How it works
From a pillar in the field to proof that the soil is recovering.
Step 1
Set up the sensor pillar
Each farm gets a concrete pillar that stands above the crop, so nothing shades the solar panel and the signal clears the maize. The sensor sits sealed in a locked box inside the pillar, safe from rain, animals and theft. Probes in the soil beside it measure at root depth.
- Solar panel and battery: no power line needed
- Sealed box, locked inside the concrete
- Taller than the maize, so the signal reaches far
- Probes at root depth measure moisture, temperature and pH
Step 2
Measure the plot by walking it
A field officer opens the plot on a phone and walks along its edge. At each corner they stop for a moment and turn, and the app marks the corner by itself. Back at the start, the plot's shape and area are saved. No tape measure, no surveyor.
- Uses the phone's GPS and compass, nothing else to buy
- Each corner appears on the map and is confirmed before saving
- The area is worked out for you, in hectares
Step 3
Readings arrive every 15 minutes
Every 15 minutes the sensor wakes up, measures, sends its readings and sleeps again to save its battery. Where there is WiFi it sends them straight to the platform. Where there is none, long-range radio carries them up to about 2 km to a small farm gateway, which forwards them and keeps them safe while the internet is down.
- Charts for every farm, plot and sensor
- No reading lost when the internet goes down
- You see at a glance which sensors are working
Step 4
Alerts before problems grow
The platform checks the readings every 5 minutes. When the soil is too dry, its pH leaves the healthy range, a battery runs low or a sensor stops reporting, field officers get an e-mail, and the alert stays in the app until someone says they are dealing with it.
- Dry soil
- Soil pH out of the healthy range
- Low battery
- Sensor not reporting
Step 5
See the land improve
Over weeks and seasons the platform shows whether soil moisture is rising, steady or falling, and follows each plot from conventional farming through conversion to organic. The impact report adds up the land restored and the fertilizer and pesticide no longer used, ready to share with partners.
- Soil trends for each farm
- Each plot's stage, from conventional to organic
- The report as a spreadsheet or PDF
Want a sensor on your farm?
Tell us about your farm and a field officer will contact you.